SEKURE SX-3100LCD Manuel de l'opérateur télécharger pdf (Page 338)

100

101

326 GAS ANALYZER

4. Insert the probe at least 12" into the tailpipe of the vehicle.

Insert the end of the sampling probe a minimum of 12" into the tailpipe of the vehicle.

The sampling probe comes with two types of retainers to ensure that the probe stays

inside the pipe during use. Once the probe is inserted, use the chain to secure tailpipe

probe during the road test.

5. Route and secure the sampling, exhaust, and drain hoses out of the vehicle.

Take up the slack of the remaining hose outside of the vehicle by rolling up the excess

and placing it inside. Secure the hoses in place without pinching them. Make certain

that the exhaust and drain hoses are routed outside of the vehicle to avoid the risk of

exhaust fumes blowing back inside.

FLEX-HOSE

PXA-100

EXHAUST

PROBE

TESTER

SECURE CHAIN

SAMPLING,

EXHAUST,

AND DRAIN

HOSE OUTLETS

FIGURE 9. Inserting the Sampling Hose into the Tailpipe for Road Testing

WARNING!

Carbon monoxide gas is poisonous. Vent Gas Analyzer exhaust

hose and vehicle tailpipe to the outside.

WARNING!

Once the analyzer samples the gas, it deposits the sample

through the exhaust and drain hoses of the analyzer sampling

hose assembly. It is important that this exhaust is treated the

same as the exhaust coming out of the vehicle’s tailpipe.

Therefore, proper routing of the hoses is required for ventilation

of the exhaust and drain.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 377 378

Commentaires sur ces manuels

Pas de commentaire

SEKURE SX-3100LCD Manuel de l'opérateur Page 338

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité SEKURE SX-3100LCD