SEKURE SX-3100LCD Manuel de l'opérateur télécharger pdf (Page 288)

276 OBD II

DATA LIST

Press 1 to select <DATA LIST> from the <OBD II FUNCTIONS> menu.

The Data List mode displays the current state of diagnostic data parameters as reported by

the vehicle's ECU(s). This is commonly referred to as Mode 1 data.

If the vehicle contains more than one OBD II ECU, select the primary ECU for the display

of diagnostic information. Refer to Section 5.0 Displaying Data For Multiple ECUs on

page 299 for more information.

PARAMETER SELECTION

ALL DATA

Choose <ALL DATA> from the <SELECT DATA> menu to proceed directly to the

<DATA LIST> mode and display all of the data items reported by the vehicle's controllers.

USER DATA

Choose <USER DATA> from the <SELECT DATA> menu to select a subset of data items

to display. All of the available data items are displayed. Use y to select the

parameters you want to view. n can be used to deselect a data item. Press e to

go to <DATA LIST> mode.

ACTIVE KEYS

u d Change highlighted item.

y Select highlighted item.

n Deselect highlighted item.

Ay Select all data items.

An Deselect all data items.

e Go to <DATA LIST> mode.

MULTIPLE ECUs

If the vehicle supports multiple ECUs, a status character to the left of the diagnostic data

parameter indicates the status of the parameter data. Refer to Section 5.0 Displaying Data

For Multiple ECUs on page 299 for a detailed description of the tolerances for the

different parameters.

CHARACTER STATUS

= Indicates multiple controllers are reporting approximately

the same value for the parameter.

> Indicates multiple controllers are reporting different

values for the parameter.

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 377 378

Pas de commentaire

SEKURE SX-3100LCD Manuel de l'opérateur Page 288