SEKURE SX-3100LCD Manuel de l'opérateur Page 265

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 378
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 264
OBD II 253
DTC INFO MENU
Press 2 to select <DTC INFO> from the <DIAGNOSTIC> menu. The <DTC INFO>
menu is displayed.
<1: CURRENT CODES> Display codes currently stored in the ECU.
<2: HISTORY CODES> Display all codes ever stored in the ECU.
<3: PENDING CODES> Display codes that are pending in the ECU.
<4: CLEAR CODES> Clear Trouble Codes.
<5: REPAIR CONFIRM> Verify problem that sets a code or to confirm complete
repairs.
ACTIVE KEYS
u d Change highlighted menu item.
1 - 5 Select menu item.
e Select highlighted menu item.
CURRENT CODES
Press 1 to select <CURRENT CODES> from the <DTC INFO> menu. Codes currently
stored in the ECU are displayed. The number of stored codes is displayed in the upper
right corner.
A “” in the upper right of the display indicates that there are more DTCs than can be
displayed at one time. Use the u and d keys to scroll through the list of received
Trouble Codes.
A “*” next to the Trouble Code ID indicates there is freeze frame data associated with that
DTC. If freeze frame data is available for the highlighted DTC, press e to display
the <FREEZE DATA>.
ACTIVE KEYS
u d Move the highlight up or down.
Scroll through all Trouble Codes.
e Display Freeze Data.
FREEZE DATA
Freeze Data is only available for certain DTCs. The ECU stores up to two frames of data.
The Freeze Data is the state of the sensor and ECU outputs when the DTC was recorded.
The Tester displays all of the parameters saved with the DTC. The Freeze Data does not
change (it is static) and does not represent the current ECU state.
The Freeze Data is displayed in a data list format. Only the <DATA LIST> mode is
available for Freeze Data.
ACTIVE KEYS
u d Move the cursor (highlight) up or down.
AH Display parameter information.
x Return to Trouble Code review.
Vue de la page 264
1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 377 378

Commentaires sur ces manuels

Pas de commentaire