SEKURE SX-3100LCD Manuel de l'opérateur télécharger pdf (Page 183)

OBD 171

43.0 AHC (ACTIVE HEIGHT CONTROL

SUSPENSION)

The M-OBD AHC system provides enhanced diagnostic functions and procedures. The

M-OBD AHC system is diagnosed using the Tester connected to DLC3. Please verify the

correct vehicle connection. For Operating Procedures for the Data List, DTC Info, Active

Test, and Snapshot functions, please refer to Section 4.0: M-OBD Functions.

ACTIVE KEYS

u dq Change to next/previous menu item.

1 - 5, 7 Select menu item.

E Select highlighted menu item.

X Return to the previous menu.

HEIGHT CONTROL TEST

Press 5 to select <HEIGHT CTL TEST> from the <DIAGNOSTIC MENU>. The

Height Control function is used to perform an active test on the height control function of

the suspension system. Please reference the Service Manual for the Height Control

procedures. For the control of the active test, please refer to Section 4.0: M-OBD

Functions.

ACTIVE KEYS

u dq Change to next/previous menu item.

1, 2 Select menu item.

E Select highlighted menu item.

X Return to the previous menu.

SIGNAL CHECK

Press 7 to select <SIGNAL CHECK> from the <DIAGNOSTIC MENU>. The Signal

Check function is used to check the AHC sensor signals. Refer to the diagnostic section of

the Repair Manual before performing this function.

<ALL SIGNAL CHECK> Check all sensor signals.

<ONE SIGNAL CHECK> Check one selected sensor signal.

ACTIVE KEYS

u dq Change to next/previous menu item.

1, 2 Select menu item.

E Select highlighted menu item.

X Return to the previous menu.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 377 378

Pas de commentaire

SEKURE SX-3100LCD Manuel de l'opérateur Page 183