SEKURE DGP2-648 Manuel d'installation télécharger pdf (Page 5)

DIGIPLEXNE CONTROL PANEL 3

1 INTRODUCTION

DigiplexNE is a security and access control system with 8 on-board zone

inputs (16 with zone doubling) that is expandable to 96 zones via the 4-wire

combus. DigiplexNE features up to 999 users, 8 partitions, 32 doors, 32

schedules, 16 access levels, and can support up to 127 modules in any

combination.

DigiplexNE systems provide the highest level of protection for banks, high-

security military and government sites, luxurious residential homes and any

place where maximum security is essential. These systems are designed to

be easy to use, and the modular concept of these systems provides

installer’s with labour-saving features that make expanding, installing and

servicing these systems quick and convenient.

Expand the DigiplexNE system by adding plug-and-play expansion modules

anywhere and in any combination on the 4-wire combus. Modules are

connected to the combus at the most convenient location and then their zone

inputs are assigned to the desired zone and partition. Also, only a module’s

used inputs are assigned to zones in the system. Keyswitches, remote

controls and unused module inputs do not use up zones. Once installed, all

combus modules, including motion detectors, can be programmed remotely

via a keypad or the WinLoad upload/download software.

DigiplexNE also supports 32 virtual zones in addition to its 96 security

zones and 32 access control doors. Virtual zones can be used to automate

PGM activations without occupying a security zone and without affecting

the system’s security functions. DigiplexNE is a logical solution to every

installer’s security, access control and home automation installation needs.

CTR-21 APPROVAL

The DigiplexNE control panel (DGP-NE96) meets the European Union

Common Technical Requirement CTR-21. The CTR-21 requirement is an

electrical standard that defines the analogue interface for all two-wire

telecommunications equipment (i.e. DECT, PABXs, etc.) intended for

connection to the Public Switched Telephone Network. This allows the

DigiplexNE control panel to be used in as many as 19 countries, such as

Belgium, Germany, Greece, Portugal, Sweden and Switzerland.

DigiplexNE control panels with the CTR-21 approval are available as an

option only.

1.1 FEATURES

 Digital combus:

• Provides constant power, supervision and two-way communication

between the control panel and all its modules

• Supports up to 127 modules

• Connect modules up to 3000ft (914m) from the panel

• Sabotage-proof technology without additional wiring

 96 addressable zones

 8 partitions

 998 user codes, 1 System Master code and 1 installer code

 Built-in access control

 2048 stored events

 1 telephone line and optional secondary telephone line

 Remote diagnostics and pager messaging

 False alarm prevention features

 32 independent keyswitch zones (does not use any of the 96 zones)

 8 on-board hardwired input terminals

 3 on-board fully programmable outputs (PGMs):

• 1 normally open, high-current transistor output (100mA)

• 2 normally open or normally closed 5A programmable relay outputs

• Up to 32 more PGM inputs through the Keyswitch’s PGM Input

feature

 PGM1 can be set as a two-wire smoke detector input

 Event reporting:

• a separate dialing sequence for each partition

• 4 Monitoring Station Telephone Numbers

• SIA, Contact ID, Ademco Contact ID Edition 2000, Pager Format

and many more communicator formats

1.2 SPECIFICATIONS

CONTROL PANEL (NON-UL SYSTEMS)

AC Power: 16Vac, 20/40VA, 50-60Hz

Battery: 12Vdc, 4Ah minimum

Auxiliary Power: 12Vdc 600mA typical, 700mA maximum,

fuseless shutdown at 1.1A

Bell Output: 1A, fuseless shutdown @ 3A

PGM Output: PGM1 (100mA), PGM2 and PGM3 (5A relay)

Event Buffer: 2048 events

All control panel outputs are rated to operate between 10.8Vdc and

12.1Vdc

CONTROL PANEL (UL COMPLIANT SYSTEMS)

AC Power: 16Vac, 40VA, 60Hz

Battery: 12Vdc, 4Ah minimum

Auxiliary Power: 11.4 to 12.5Vdc, 200mA maximum, fuseless

shutdown at 1.1A

Bell Output: 11.4 to 12.5Vdc, 1A maximum, fuseless

shutdown @ 3A

PGM Output: PGM1 (100mA), PGM2 and PGM3 (5A relay)

Event Buffer: 2048 events

All control panel outputs are rated to operate between 11.4Vdc and

12.5Vdc

Specifications may change without prior notice.

UL Note: The DGP-NE96 control panel has been tested with the LCD Keypad

(DGP2-641) only.

General Note 1

Please note that only LCD and Grafica keypads can be used to program the

DigiplexNE system. LED keypads cannot be used to program the system.

General Note 2

Please note that the steps may differ when programming with the Grafica

keypad (DNE-K07). If not indicated, refer to the complete Grafica User

Manual, which can be downloaded for free from our Web site at

www.paradox.ca.

1 2 3 4 5 6 7 8 9 10 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

SEKURE DGP2-648 Manuel d'installation Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité SEKURE DGP2-648