SEKURE ITI UltraGard Manuel du propriétaire télécharger pdf (Page 60)

Fail-to-Communicate

Your security system cannot communicate an alarm to the central

monitoring station. Your system will try to report to the central moni-

toring station three times before it tells you there is a fail-to-commu-

nicate problem. It will then try five more times.

Manual Tests

The tests your security system automatically performs provide con-

tinuing reassurance that it is working properly. There are also system

tests you can do yourself on a regular basis as an added safeguard. Tak-

ing time to do regular manual tests will familiarize you with your sys-

tem and alert you to anything unusual, such as cut phone lines or

sensors that have been tampered with.

It is recommended that you test your system on a weekly basis.

Testing Sensors

The sensor test checks all sensors, including panic buttons and motion

detectors. Part of the sensor test requires you to walk through your

home and open, or trip, each sensor. (See following table.)

4. Wireless smoke detectors

automatically reset them-

selves when all smoke

clears.

5. If the sensor chamber is

dirty or covered.

NN TROUBLE Six short

beeps then

Sensor NN

Trouble.

Fail-to-Communicate Display, if

available, will

read

You will hear

96 ALARM

PHONE FAIL-

URE

Phone fail-

ure trouble.

If you discovered the fail-to-communicate while attempting to send

an auxiliary or silent alarm, the system will change to a police siren.

Once the siren shuts off, trouble beeps begin.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 145 146

Pas de commentaire

SEKURE ITI UltraGard Manuel du propriétaire Page 60