SEKURE Paradox Spectra 1641 Manuel d'utilisateur télécharger pdf (Page 12)

Spectra Keypads 11

[3] Power Failure

The system has detected a loss of AC power. This trouble

usually occurs during a power failure. If a power failure is not

occurring in your establishment and this trouble appears,

contact your Security Company for service.

[4] Bell/PGM2 Disconnected Trouble

Any device connected to the Bell or PGM2 output is no longer

connected to your alarm system.

[5] Bell Current Failure

During an alarm, the bell output, which uses a fuseless

circuit, will automatically shut down if the current exceeds a

predetermined value. When the system is disarmed, the

current is cut from the bell output and the Trouble warning

may extinguish, but the Trouble may re-occur during the next

alarm if the situation is not corrected.

[6] Auxiliary Current Failure

The auxiliary output, which supplies power to your alarm

system’s accessories, uses a fuseless circuit to protect the

power supply against current overload and automatically

shuts down if the current exceeds a predetermined value.

[7] Communication Failure

Your alarm system, if monitored, could not communicate with

the Security Company.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 46 47

Pas de commentaire

SEKURE Paradox Spectra 1641 Manuel d'utilisateur Page 12