SEKURE Paradox Digiplex DGP-610 Manuel d'utilisateur télécharger pdf (Page 11)

User’s Manual

3.0 ARMING

When the system is armed, it will respond to any breach in the zones

according to the way each zone is programmed. For example, if someone

opens a window that is armed, the system can trigger an alarm and alert

your Security Company.

3.1 E

XIT

ELAY

IMER

When you arm the system, it will start the Exit Delay Timer to provide you

with enough time to exit the protected area before the system is armed. The

Status Light

will flash green while the time elapses. The timer can be

assigned different time limits and the keypad can be programmed to beep

while the time elapses on the timer. Discuss these options with your installer.

3.2 R

EGULAR

RMING

This method is used for the everyday arming of the system. All zones

within the protected area must be closed to arm the system. To check the

status of the zones in each area, refer to section 2.5

Area Status Display

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 56 57

Pas de commentaire

SEKURE Paradox Digiplex DGP-610 Manuel d'utilisateur Page 11