SEKURE DGP2-648 Manuel d'utilisateur télécharger pdf (Page 14)

12 User’s Manual

You may use the One-Touch keys (see section 5.6) or a

keyswitch (see section 5.7) to arm the area. Ask your

installer for details.

5.6 ONE-TOUCH KEYS

Your installer can program your system to respond to certain features

with the touch of a key. You will then access these features without

using your User Access Code by pressing and holding the desired

key. To do so, press and hold the following keys.

For more information concerning these features, please refer to their

respective sections.

5.7 KEYSWITCH ARMING

Your installer can add a keyswitch to arm and disarm your system.

Your installer can program the keyswitch to arm in Regular, Stay,

Force or Instant mode. In addition, the keyswitch can act as a

Maintained or Momentary keyswitch.

5.7.1 MAINTAINED KEYSWITCH

To arm the system, place in the “ON” position.

To disarm the system, place in the “OFF” position.

• The [Arm] key to Regular Arm an area.

• The [Disarm] key to disarm a Stay/Instant armed area.

• The [Stay] key to Stay Arm an area.

• The [Force] key to Force Arm an area.

• The [Byp] key to access Bypass Programming.

• The [5] key to Instant Arm an area.

• The [6] key to modify the backlight.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Pas de commentaire

SEKURE DGP2-648 Manuel d'utilisateur Page 14