SEKURE 1686V Guide de l'utilisateur télécharger pdf (Page 18)

16 User Guide

Sending Text Messages to Arm / Disarm

You can arm or disarm the system by sending a text message (SMS) from any cell phone. The message must

be sent to the GSM module’s phone number, as determined by the cell phone provider (consult your installer for

more information). Text message commands have a specific format which follows this pattern:

USER CODE].[ACTION].A[PARTITIONS].[PHONE NUMBER]

NOTE: SMS commands must be entered in capital letters.

Example:C1234.ARM.A1.5555551234

C1234.OFF.A1.5555551234

In the example above, user code 1234 will arm or disarm partition 1, and the confirmation message will be sent

the following phone number: (555) 555-1234.

User Code

The first part of the text message is the user code (same code used on the alarm system). It must be prefaced

with the letter C and followed by a period.

Example:C1234.

Action

It is possible to arm or disarm the system. The command must be entered after the user code and followed by a

period. To arm the system, enter the ARM command. To disarm the system, enter the OFF command.

Example:C1234.ARM.

Partition

It is possible to arm or disarm specific partitions. The partitions must be prefaced by the letter A, and separated

by commas for individual partitions. It is also possible to affect a series of partitions by writing TO between the

start and end partitions of that series. The list of partitions must be followed by a period.

Examples:C1234.ARM.A1.

C1234.ARM.A1TO2.

Phone Number

This informs the system of which phone number must be notified by SMS to confirm the status change.

Example:C1234.ARM.A1,3,5TO7.5555551234

IP Information

It is possible to receive the IP address of the GSM module via text message. The GSM module will then send a

text message to the specified phone number displaying the IP address of the GSM module. A valid user code

must be entered to receive the IP address. The IP address can be used to configure remote software. Consult

your installer for more information.

Example:C1234.IP.5555551234

GSM Module Phone Number

Enter the phone number of your GSM module here (consult your cell phone provider)

__________________________________________

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

SEKURE 1686V Guide de l'utilisateur Page 18